How To Copy CD

To make a copy of a CD, you'll need a master to copy,
a blank disk, a CD-RW drive, and the proper software.

Most computers now include either a CD-RW or DVD-RW
drive. If not, you can purchase the appropriate drive reasonably cheaply.
Check out online prices or nip in to your local computer store for advice.

If you have a DVD-RW drive, you'll be able to copy
both CDs and DVDs. The rate of copying will vary,
with 4X being the slowest and up to 48X being the
fastest at the moment. If your drive supports 48X, you can duplicate
a CD in a matter of minutes.

Once you have the CD-RW or DVD-RW drive and some
blank CD-R media, all you need is the software to
duplicate. There is a huge range of CD buring software from freeware
to commercially available packages such as Nero. You will be spoiled for choice!

Once you have everything set up, just run the
software and create your disk. You can copy many
types of media, including pictures, video, audio,
and even data from your computer to a CD. Depending on what
you want to copy, all need to do is select it from the
software menu then sit back and let it rip.

You can back up just about anything - the
choices are entirely up to you.

Article Source: http://www.kokkada.com

For further information on CD Duplication Visit www.cdduplicationweb.com right now!

Labels:

Subscribe in a reader

Speed up CD-ROM data transfer

DMA mode

Windows XP sets DMA mode on IDE channels wrong. Most of CD-ROM devices support this, but Windows XP puts them in PIO ( slower ). DMA wont speed device, but it will use less RAM memory, and that way data transfer from CD-ROM to computer will be faster.
Go to My Computer-Hardware-Device Manager.
Find "IDE ATA/ATAPI Controllers" and click «+» (plus) near it. Double click on «Primary IDE channel». Look at «Advance settings» and look at Device 1 settings. It's probably set up to PIO transfer mode. Set to «DMA if available».
Back to "IDE ATA/ATAPI Controllers". Do same for «Secondary IDE channels» now. If it's in PIO mode.
If this won't help, you can reinstall IDE channels that won't accept DMA mode. And that you can do in following way:
Right click on IDE channel, «uninstall» and OK.
Restart your computer and look if IDE channel excepted DMA mode.
IN some cases, you can get only MultiWord, but that's better than PIO mode, too.

Labels: ,

Subscribe in a reader
privacy: